Delta M815-MX Series Manual page 8

13 PCI1, 2
14 J9 (WOL)
15 COM2
16 J10 (IrDA)
17 J11, 12 (USB2)
18 BAT1
19 BZ1
20 LED (PWR LED)
21 FSP1
22 JP3
23 J8 (CHASSIS FAN)
24 FDC1
25 IDE1, 2
26 ATX1
27 DIMM1, 2, 3
28 J1(CPU FAN)
29 PGA370
30 JP1
Infrared function are optional at the time of purchase that you can
ignore it.
Ground yourself properly before removing your any devices from the
anti-static bag. To protect them against damage from static electricity.
Unplug the power from your system and then touch any metal part on
the system chassis.
Avoid touching device components, such as IC chips, leads, and
connectors. Hold the device by its edges and do not touch the bottom
of the board.
Place components on a grounded anti-static pad or on the bag that
came with the component whenever the components are separated
from the system.
Do not place the system in the following locations. It may cause mal-
functions of the system.
8
M815-MX Series User's Manual
Two 32-bit PCI expansion slots
Wake-up On LAN connector
Connector for auxiliary serial COM2 port
Infrared connector (Optional)
Auxiliary USB connector (Optional)
Lithium CR2032 battery
Warning and judging the system state by buzzer
Power LED for monitoring power state
Connectors for panel switches and indicators
Jumper to set CMOS state
Fan connector for chassis cooling fan
Floppy disk drive connector
Primary/Secondary IDE channel connector
Connector for the ATX power supply cable
DIMM socket for SDRAM memory module
Fan connector for CPU cooling fan
CPU socket for PGA370 processors
Jumper to set keyboard or mouse power on