Delta M815-MX Series Manual page 54

screen and press <Enter> key on this option. You get a confirmation dialog box with
a message display the menu :
Pressing <Y> key to stores the selections made in the menus in CMOS special
section of memory that stays on after you turn your system off. The next time you boot
your system, the BIOS configures your system according to the setup selections
stored in CMOS. After saving the values the system is restarted again.
Selecting "Exit Without Saving" on the main program screen and press <Enter>
key on this option. You get a confirmation dialog box with a message display the
menu :
This allow you to exit setup without storing in CMOS any change. The previous
selections remain in effect. This exits the setup Utility and restarts your system.
54
M815-MX Series User's Manual