Delta M815-MX Series Manual page 22

location, such as an Internet Service Provider (ISP), or a high-speed digital
connection for visual data types that is display technology independent.
Never force a card into a slot. If it doesn't fit look at the slot on the
motherboard to make sure there are no wires or other obstructions
to the slot.
When plugging the card in, try to push the entire card in at one
time. Don't force one end of the card into the slot-first and then the
other. This will create a rocking motion between the card and the
slot and it will damage the pins with in the slot.
Make sure that the card is seated securely into the slot.
This motherboard operates on a 3.3 volt standby for PCI v2.2.
Because of this, you need to unplug the AC power cord before
installing your card. Otherwise, the motherboard may automatically
power up when the card is inserted the slot.
Follow the procedure below to install the add-on card.
Locate the expansions slots on the motherboard. Select which slot you plan to
use according to the kind of add-on card you are going to install.
In the system case, remove the blanking plate from the opening in the case
adjacent to the slot you are going to use.
Hold the edge connector of the add-on card directly over the slot that you are
going to use. The metal bracket on one edge of the add-on card fit into the
opening from which you removed the blanking plate.
Carefully press the card down so that the edge connector installs into the
expansion slot. You might need to rock the card slightly to make sure that the
edge connector is seated properly into the slot.
Drive a screw through the metal bracket on the edge of the card to secure it in
place.
AIMM (AGP In-line Memory Module): The AIMM is intended for
use as a local memory subsystem for a graphics core integrated in
a core-logic chipset. These AIMMs are intended to provide 4MB
of addressable SDRAM (arranged as 1M x 32). Which resides on
a module in a 3.3V or universal AGP slot (see the figure below to
22
M815-MX Series User's Manual