Delta M815-MX Series Manual page 44

Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the physical parallel
port. The available options for Onboard Parallel Port are : [378/IRQ7] [278/IRQ5]
[3BC/IRQ7] [Disabled].
Parallel Port Mode
This option specifies the parallel port mode.
[SPP] : The normal parallel port mode is used.
[EPP] : The parallel port can be used with devices that adhere to the Enhanced
Parallel Port (EPP) specification. EPP uses the existing parallel port signals to
provide asymmetric bidirectional data transfer driven by the host device.
[ECP] : The parallel port can be used with devices that adhere to the Extended
Capabilities Port (ECP) specification. ECP uses the DMA protocol to achieve
data transfer rates of up to 2.5 Megabits per second. ECP provides symmetric
bidirectional communication.
The available options for Parallel Port Mode are : [SPP] [EPP] [ECP] [ECP+EPP].
POWER After PWR-Fail
A traditional ATX system should remain at power off stage when AC power resumes from
power failure. This design is inconvenient for a network server or workstation, without an
UPS, that needs to keep power-on. This option is used to solve this problem.
[On] : Selecting On lets the system can automatically power-on after AC power
resumes.
[Off] : The system will power-off if you select Off.
[Former-Sts] : If Former-Sts option is selected, the system will power-on or
power-off based on the original state.
The available options for POWER After PWR-Fail are : [Off] [On] [Former-Sts].
Game Port Address
This option is used to assign an address for the Game Port. The available options for
Game Port Address are : [201] [209] [Disabled].
Midi Port Address
The option is used to assign an address for the Midi port. The available options for Midi
44
M815-MX Series User's Manual