Delta M815-MX Series Manual page 29

PS/2 Mouse
Printer with the
parallel interface
PS/2 Keyboard
Device with the
USB interface
May cause USB Hub failure or malfunction due to system was not prop-
erly shut down. For stable operation of the system, however, we recom-
mends you remove device and reinstall driver by Windows OS.
Get Ready to Boot the System
At a minimum, you will need the following components in order to build a fully
functioning system.
System case with ATX power supply unit
PGA370 Processor (Intel Celeron/Pentium III), and one SDRAM memory module
One IDE HDD drive, one CD-ROM drive, and one FDD drive
One PS/2 mouse, one PS/2 keyboard, and one display monitor
Of course you can use the system I/O ports and expansion slots to add many more
2. Hardware Installation
Headphone
Device with
or powered
the serial
speaker
interface
Joystick or
pad controller
Tape player Microphone
or audio
source
device
Display unit
M815-MX Series User's Manual
29