Advertisement
7. BIOS Configuration
7. BIOS Configuration
The motherboard provides a 4MB, 3.3V, 32-Pin PLCC package Firmware Hub chips that can
be updated using provided BIOS Utility. The Setup Utility stores data about motherboard com-
ponents and the configuration of devices that are connected to it. The information is used to
test and initialize components at start up time and to make sure everything runs properly when
the system is operating. The utility provide you the opportunity whenever you need to install
your motherboard, change its default value for better performance or reconfigure your system
when new components or device are used. We will suggest updating your BIOS if you have
problems with your motherboard and you know that the new BIOS revision will solve your
problems. Unnecessary updating may result more problems for your motherboard.
When you start up the system, the system provides the opportunity to run this program. This
appears during the Power On Self Test (POST), press <DELETE> key to call up "Setup Utility".
If you are a little bit late pressing the mentioned key(s), POST will continue with its test routines.
If you still need to call setup, restart the system by pressing <Ctrl> + <Alt> + <Delete> keys, or
press the reset button on your chassis.
You can also restart by turning system off and then back on again. But do it only first 2 way fail.
The below table, CMOS SETUP UTILITY will appear on screen after call up.
25
M81-MX Series User's Manual
Advertisement
