Delta M815-MX Series Manual page 37

3. BIOS Setup Utility
ond/Third Boot Device are : [Floppy] [HDD-0] [SCSI] [CDROM] [HDD-1] [HDD-2]
[HDD-3] [LAN] [Disabled] [LS/ZIP].
Boot Other Device
If you enable this item, the system will search all other possible locations for an
operating device it fails to find one in the devices specified under First, Second and
Third Boot Devices. The available options for Boot Other Device are : [Enabled]
[Disabled].
Swap Floppy Drive
If you have two floppy drive in your system, this item allows you to swap around the
assigned drive letters so that drive A become drive B, and drive B become drive A.
The available options for Swap Floppy Drive are : [Enabled] [Disabled].
Boot Up Floppy Seek
If this item is enable, it checks the geometry of the floppy drive at start up time.
The available options for Boot Up Floppy Seek are : [Disabled] [Enabled].
Boot Up NumLock Status
This item defines if the keyboard <NumLock> key is active when your system is
bootup. The available options for Boot Up NumLock Status are : [On] [Off].
Typematic Rate Setting/Rate (Chars/Sec)/Delay (Msec)
When Disabled, the two items (Typematic Rate and Typematic Delay) are irrelevant.
Keystrokes repeat at a rate determined by the keyboard controller in your system.
When Enabled, you can select a typematic rate and typematic delay.
When the typematic rate (the rate at which character repeats when you hold down a
key) to define how many characters per second.
When the typematic rate setting is enabled, you can select a typematic delay (the
delay before key strokes begin to repeat) to define how many milliseconds.
The available options for Typematic Rate Setting are : [Disabled] [Enabled].
The available options for Typematic Rate (Chars/Sec) are : [6] [8] [10] [12] [15] [20]
[24] [30].
The available options for Typematic Delay (Msec) are : [250] [500] [750] [1000].
37
M815-MX Series User's Manual