Delta M815-MX Series Manual page 14

COM2: Auxiliary Serial Connector
If you want to have auxiliary serial port available in your system, you must install the
auxiliary serial cable assembly with bracket. The cable assembly is supplied with
this motherboard. Follow the procedure below to install the auxiliary serial cable
assembly.
Locate the COM2 connector on the motherboard.
In the system case, remove the blanking plate from the opening in the case
adjacent to the slot you are going to use (keep the removed blanking plate for
future use).
Insert the cable assembly and drive a screw through the metal bracket on the
edge of the cable assembly to secure it in place.
Plug the connector of the cable assembly into the COM2 connector on the
motherboard.
Serial cable connector is usually keyed so that they can only be
installed correctly on the connector.
To Install the CPU and Cooling Fan
This motherboard designed for Intel PPGA/FC-PGA Celeron and FC-PGA Pentium
III processors. The system utilizes the Intel 815 chipset with Award BIOS. It can
support speed of 300MHz through 1GHz on the Intel CPU and FSB of 66MHz to
133MHz.
The CPU is a sensitive electronic component and it can easily be dam-
aged by static electricity. Do not touch the CPU pins with your fingers.
You should be able to insert the CPU into the socket with virtually zero
14
M815-MX Series User's Manual