NRP2000/W IP Phone User Manual
Here are step for activating the phone after installation:
1.
Power up the phone.
2.
Select a language.
3.
Input the PIN (obtained from your administrator).
Press the "Enter" soft key to complete registration.
4.
Note:
If you don't want to register, press the
return to the home page.
To disable the Plug-and-Play function, log into the Web GUI of the IP phone, choose Off for PnP
Active.
3 Call Function
3.1 Answer the Calls
When the phone is ringing, there are 3 ways to answer the call:
A. Answer by handset
Pick up the handset and talk with the caller. If you want to hang up, just put back the handset. When you are
talking with the handset and want to switch to speaker or headset mode, please press
key, and then put down the handset.
B. Answer by speaker
New Rock Technologies, Inc.
button on the phone to quit the PIN-entering interface and
key or
15