February 2009
Ending a Log
Stopping All Logs
Restarting All Logs
Ending All Logs
View All Sites
5-12
To end a log:
1. First, select the log you wish to end in the Log Manager (shown in
Figure 5-2 on page 5-2).
2. Then open the Log Menu, scroll to the End option, and press
[ENTER]
.
The CTF878 returns to the Log Manager, which displays the
highlighted log with a status of "Finished." The space not used by the
finished log is freed for reuse.
Note: You cannot restart a finished log. You must create a new log
with the same parameters.
To stop all logs that are currently pending or running, open the Log
Menu, scroll to the Pause All Logs option, and press
CTF878 returns to the Log Manager, which displays all logs
programmed to run now or in the future with a status of "Paused."
To restart all paused logs, open the Log Menu, scroll to the Start All
[ENTER]
Logs option, and press
Manager, which displays the logs with a status of "Pending" or
"Running."
To end all currently pending or running logs, open the Log Menu,
scroll to the End All Logs option, and press
returns to the Log Manager, which displays the running logs with a
status of "Finished."
To check on all logs, open the Log Menu, scroll to the View All Sites
[ENTER]
option, and press
the time the log is created. Thus, when another site is in use, the
CTF878 automatically starts different logs. By default, the Log
Manager only displays the logs created with the current site. View All
Sites allows the Manager to list logs for all sites.
. The CTF878 returns to the Log
[ENTER]
. Logs are associated with the site in use at
[ENTER]
. The
.The CTF878
Logging Data