Table of Contents
Advertisement
Copying (Cloning) a
Selected Log
Renaming a Log
Logging Data
In the Clone Selected Log option, you can copy the parameters of a
particular log, modify the parameters, and start the copy. To copy a
log:
1. First, select the log you wish to copy in the Log Manager (see
Figure 5-2 on page 5-2).
2. Then press [
], open the File Menu, scroll to the Clone
MENU
Selected Log option, and press
3. The Create New Log window (shown in Figure 5-4 on page 5-4)
opens. Follow the procedure discussed on page 5-4 to create a log
[F3]
name, and press
(OK) to confirm the name.
4. The General Log Format window (see Figure 5-5 on page 5-5)
opens. Follow the procedure which begins on page 5-5 to change
any settings.
Note: Unless otherwise specified, the cloned log always begins at
the current date and time, and ends after the period of time
used by the original log.
5. If you wish, scroll to the Select Measurements window (see
Figure 5-6 on page 5-7) and follow the procedure discussed on
page 5-7 to modify any parameters.
6. When you have completed modifying the log parameters, press
[F2]
(Cancel) to cancel the log or
start the new log.
The CTF878 returns to the Log Manager, which now displays the
status of the cloned log.
To rename a log:
1. First, select the log you wish to rename in the Log Manager
(shown in Figure 5-2 on page 5-2).
2. Then open the File Menu, scroll to the Rename option, and press
[ENTER]
.
3. The Rename Log window opens. (Except for the heading, the
window is identical to the Create New Log window shown in
Figure 5-4 on page 5-4.) Follow the procedure discussed on
page 5-4 to create a log name, and press
name.
The CTF878 returns to the Log Manager, which highlights the
renamed log.
February 2009
[ENTER]
.
[F3]
(Activate) to confirm and
[F3]
(OK) to confirm the
5-9
Advertisement
Table of Contents
