Table of Contents
Advertisement
February 2009
Entering Inputs
1-28
Note: You can access the Inputs entry only if you selected Enabled
for Standard Volume under the Settings tab.
Use the arrow keys to move to the Inputs tab and press [
confirm your selection. The screen appears similar to Figure 1-28
below. Use the [ ] key to move from one line to the next. Refer to
the Program Menu Map, Figure 1-34 on page 1-37.
Settings
Inputs
Pressure
Fixed
Pressure
1.0132
Temperature
Fixed
Temp
Figure 1-28: Standard Volume Window - Inputs
1. The first prompt allows you to fix the Pressure value or to render it
active.
a. Use the arrow keys to move to the appropriate choice.
b. Press [
ENTER
] to confirm your choice.
Note: If you selected
Fixed
the pressure. If you selected
Pressure
enter the
2. To enter a value for the pressure:
a. Press the [ ] key to move to the
b. Press [
ENTER
] and use the number keys to enter a value for the
pressure.
c. Press [
ENTER
] to confirm your entry.
Standard Volume
Active
Input #
Bar
2:A
Active
Input #
60
°F
2:A
Cancel
, continue on to step 2 to enter a value for
Active
, you will not be able to
box and must proceed to step 3.
Pressure
Programming Site Data
ENTER
] to
OK
box.
Advertisement
Table of Contents
