Table of Contents
Advertisement
February 2009
Limits Option (cont.)
2-4
The screen appears similar to Figure 2-4 below.
Set Line Graph Parameters
Tau
Minimum
Maximum
10
Minutes
Use Lines
Plot Average Value
Show Minimum and Maximum
Figure 2-4: Line (or Bar) Graph Parameters Window
5. The first prompt asks for the minimum value shown in the graph.
a. Press
[ENTER]
to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER]
to confirm the value.
6. Repeat the procedure in step 5 to enter the maximum value.
A line graph involves two more prompts.
7. The next prompt asks for the display interval.
a. Press
[ENTER]
to open the text box. Use the numeric keys to
enter the desired number. Press
b. The second box asks for the interval in terms of seconds,
minutes, hours, or days. Press
menu, and then press the [
desired parameter. Press
8. The final three prompts ask for details of the graph configuration:
if you want to use lines, plot the average value, or show the
minimum and maximum values. Press the [
through each value, and press
of the graph.
9. When you have configured the graph, press
the graph settings, or press [
The screen returns to Operate Mode, and displays any changes.
-10000
10000
Cancel
OK
[ENTER]
to confirm the value.
[ENTER]
to open the drop-down
] or [
] keys to move to the
[ENTER]
to confirm the entry.
] key to step
[ENTER]
to add a given detail as part
[F3]
(OK) to confirm
] (Cancel) to cancel the changes.
F2
Displaying and Configuring Data
Advertisement
Table of Contents
