Table of Contents
Advertisement
Displaying Log Data in
Graphical Form (cont.)
Logging Data
Limits
Max
Minimum
Maximum
03/03/01
13:23:41 PM
Figure 5-14: Y-Axis Window
The Y-Axis window (shown in Figure 5-14 above) allows you to
specify whether the Y axis on the graph extends to the maximum
value (Max), over the entire range (Range) or between certain
specified values (Set).
1. Use the [ ] and [ ] keys to scroll to the desired limit type. Press
[ENTER]
to confirm the entry.
If you select Max or Range for limits, you have finished entering data
in this form. But if you select Set, the CTF878 asks for minimum and
maximum limits.
2. Press the [ ] key to reach the Minimum text box.
a. Press
[ENTER]
to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER]
to confirm the entry.
3. Repeat step 2 to enter the Maximum value.
4. When you have finished, press
[F3]
or
(OK) to confirm the entries and change the graph.
Y-Axis
Range
Set
0.1234
0.1234
Cancel
OK
[F2]
(Cancel) to cancel the entries,
February 2009
03/03/01
13:53:41 PM
5-15
Advertisement
Table of Contents
