Table of Contents
Advertisement
February 2009
Entry Confirmation
Entering Pipe
Parameters
1-10
•
To confirm the entries and return to Operate mode, press
•
To leave the window without confirming the entries, press
[ESC]
(Cancel) or the
key.
In either case, the CTF878 returns to Operate Mode.
To enter the Pipe option, scroll to the Pipe tab on the Program Menu
[ENTER]
and press
. (From the Transducer window, you can scroll back
up to the Transducer tab and press the [ ] arrow key to reach the
[ENTER]
Pipe window, and press
Figure 1-9 below. To step through each parameter, press the [
See the Program Menu Map, Figure 1-34 on page 1-37.
Note: Refer to the installation reference Sound Speeds and Pipe Size
Data (914-004) for additional information about pipe sizes
and sound speeds.
Pipe
Transducer
Material
Sound Speed
OD, mm
5
Figure 1-9: Pipe Option Window
.) The screen appears similar to
Transducer/Pipe
Pipe
Fluid Path
Other
600 m/s
ODxPI, mm
Wall, mm
15.71
Cancel
Programming Site Data
[F3]
(OK).
[F2]
] key.
2
OK
Advertisement
Table of Contents
