Table of Contents
Advertisement
DIR-825/ACF
Wired WAN Connection
1. If you configure a connection to an Ethernet line, go to the Advanced /
EtherWAN page. On the page, click the icon corresponding to the LAN
port to which the IPS's Ethernet cable will be connected and click the
Apply button. If you configure a connection to a fiber optic line, skip this
step.
2. Go to the Net / WAN page and delete the default connection. To do this,
select the checkbox located to the left of the relevant line in the table and
click the Delete button.
3. Click the Add button.
In the General settings section, in the Provider drop-down list, leave
4.
the Manually value.
5.
From the Connection Type drop-down list, select the needed value.
6.
From the Interface drop-down list, select the Internet value.
7.
Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
24
Advertisement
Table of Contents
