Configuring Wired Wan Connection - D-Link DIR-816 Quick Installation Manual

Wireless ac750 dual band router with 3g/lte support and usb port

Hide thumbs Also See for DIR-816:

Table of Contents

DIR-816

Configuring Wired WAN Connection

This configuration step is available for the Router and WISP Repeater

modes.

You should configure your WAN connection in accordance with data

provided by your Internet service provider (ISP). Make sure that you have

obtained all necessary information prior to configuring your connection.

Otherwise contact your ISP.

1. On the Internet connection type page, from the Connection type

list, select the connection type used by your ISP and fill in the fields

displayed on the page.

Static IPv4: Fill in the following fields: IP address, Netmask, Gateway IP

address, and DNS IP address.

Static IPv6: Fill in the following fields: IP address, Prefix and Gateway

IP address.

Quick Installation Guide

Table of Contents