AJAX CombiProtect User Manual page 8

Temporary Deactivation
User Guide
Unpair Device
Event
Turning on the detector
Detector connection to the
, and
Alarm / tamper activation
Two options are available:
Entirely — the device will not execute system
commands or participate in automation
scenarios, and the system will ignore device
alarms and other notifications
Lid only — the system will ignore only
notifications about the triggering of the
device tamper button
The system can also automatically disable
devices when the set number of alarms is
exceeded.
Opens the detector User Guide
Disconnects the detector from the hub and
deletes its settings
Indication
Lights up green for about one
second
Lights up continuously for a
few seconds
Lights up green for about one
second
Note
Alarm is sent once in 5
seconds
Replacement of the detector
battery is described in the