AJAX CombiProtect User Manual page 11

Before installing the detector, make sure that you have selected the optimal location and
it is in compliance with the guidelines contained in this manual
CombiProtect detector can be attached to a vertical surface or in a corner.
1. Attach the SmartBracket panel to the surface using bundled screws, using at
least two fixing points (one of them – above the tamper). If you select other
attachment hardware, make sure that they do not damage or deform the
panel.
The double-sided adhesive tape may only be used for temporary attachment of the
detector. The tape will run dry in the course of time, which may result in the falling
of the detector and actuation of the security system. Furthermore, the device may
fail from a hit, as a result of an impact.