Introduction; Disclaimer - BVM Go Fly Gold F-18C Assembly And Operating Manual

INTRODUCTION

Thank you for purchasing the BVM 1/5 scale PNP F-18. This model represents the latest in
manufacturing technology and completion for the R/C jet enthusiast. The factory has built
your model for you. Please inspect all aspects of your model. The two fuselage halves have
been joined by the factory. Only a small amount of work is required to complete the assembly
of your F-18.
This manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all of the instructions and warnings in the manual.
Please read the entire manual to become familiar with the processes and procedures before
you begin to assemble your aircraft.

DISCLAIMER

Bob Violett Models Inc. assumes no liability for the operation and use of these products. The
owner and operator of these products should have the necessary experience and exercise
common sense. Said owner and operator must have a valid Academy of Model Aeronautics
license and a "Turbine Waiver" for operation in the U.S.A.
This is a sophisticated jet model aircraft. It must be operated with caution and common sense
and requires some basic mechanical ability. Failure to operate this product in a safe and
responsible manner could result in injury or damage to the product or other property.
Notice: Do not use with incompatible components or alter this product in any way outside of
the instructions provided by BVM, Inc. The BVM F-18 has been designed and flight tested
around 120-160N class engines as a twin and 250-310N as a single. Damage to the aircraft
may result from exceeding this thrust limitation (72 lbs).
BVM ®2021 3 10/2021