INTRODUCTION
Thank you for purchasing the Go Fly F-86 Sabre. This model represents the latest in
manufacturing technology and completion for the R/C jet enthusiast. The factory has
expertly crafted and thoroughly inspected all aspects of the model. Only a small amount of
work is required to complete the assembly of your F-86 Sabre.
This manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all of the instructions and warnings in the manual.
Please read the entire manual to become familiar with the processes and procedures
before you begin to assemble your aircraft.
Disclaimer
Bob Violett Models Inc. assumes no liability for the operation and use of these products.
The owner and operator of these products should have the necessary experience and
exercise common sense. Said owner and operator must have a valid Academy of Model
Aeronautics license for operation in the U.S.A.
This is a sophisticated model aircraft. It must be operated with caution and common sense
and requires some basic mechanical ability. Failure to operate this product in a safe and
responsible manner could result in injury or damage to the product or other property.
Notice: Do not use with incompatible components or alter this product in any way outside
of the instructions provided by BVM, Inc. The BVM F-86 Sabre has been designed and
flight tested with 100 – 130 class turbines.
List of BVM supplied items
Assembly and Operating Manual Package
Central Controller Instructions
Fuel System Check List
6 inch Balsa Stick 1 x1/2 inch
Black Filler Plastic
Black Fiber Tape
Recommended Accessories
You may have some of these products in your shop, but if not, refer to this list.
100 - 130 class turbine
BVM UAT
20 Channel Power Safe Receiver
(2) 7.4v Batteries 3600 mAh RX
Bavarian Demon Aero Cortex Pro Gyro
General Purpose Jet Foam Cradle
BVM ® 2020
(#6044)
(SPMAR20310T)
(V-PLURX15-36002)
(#V-DA-BD-Cortex Pro)
(#PA-SR-0080)
1
Need help?
Do you have a question about the GO FLY GOLD F-86 Sabre and is the answer not in the manual?