Table of Contents
Advertisement
Remove the screws that hold the nose
wheels in place using a 2mm driver.
NOTE: When putting the screws back in a small
amount of blue Loctite should be used.
Use a small amount of Super Lube on the
axle for the nose wheel. This will be done for
both left and right.
RX MOUNTING TRAY AND BATTERY LOCATION
To access the RX mounting tray you will
need to pull the anti glare shield out of the
way. The shield is held in place by Velcro
and will easily come out.
BVM ®2021
21
10/2021
Advertisement
Table of Contents
Need help?
Do you have a question about the Go Fly Gold F-18C and is the answer not in the manual?
Questions and answers