Introduction; Disclaimer; Notice - BVM F-15B Assembly And Operating Manual

INTRODUCTION

Thank you for purchasing the BVM GO Fly F-15. This model represents the latest in manufacturing
technology and completion for the R/C jet enthusiast. The factory has expertly crafted and thoroughly
inspected all aspects of the model. Only a small amount of work is required to complete the assembly
of your F-15.
This manual contains instructions for safety, operation and maintenance. It is essential to read and
follow all of the instructions and warnings in the manual.
Please read the entire manual to become familiar with the processes and procedures before you
begin to assemble your aircraft.

DISCLAIMER

Bob Violett Models Inc. assumes no liability for the operation and use of these products. The owner
and operator of these products should have the necessary experience and exercise common sense.
Said owner and operator must have a valid Academy of Model Aeronautics license and a "Turbine
Waiver" for operation in the U.S.A.
This is a sophisticated jet model aircraft. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this product in a safe and responsible
manner could result in injury or damage to the product or other property.

Notice:

Do not use with incompatible components or alter this product in any way outside of the
instructions provided by BVM, Inc. The BVM F-15 has been designed and flight tested around 36 lbs
class engines. Damage to the aircraft may result from exceeding this thrust limitation (36 lbs).
BVM ®2021 2 April 2021