Table of Contents
Advertisement
Loosen the four 3mm hex screws above the eyelets, decouple the two black plugs and
3.
remove the Motor Amplifier (Steering AMP)
4. Connect the new motor and reverse your steps.
Appendix G – Steering Encoder replacement
Parts required for this service:
2.5 mm hex
5 mm hex
Replacement Steering Encoder
3 mm hex (optional)
Turn the key to power off the scrubber. Raise the seat and disconnect the red battery coupling
Brain Corporation Proprietary and Confidential
64
and the seat sensor connection (optional).
Steering Troubleshooting Guide
Date Published: 4/9/21
52
Page
of
Advertisement
Table of Contents
