Table of Contents
Advertisement
13. Verify that the wheel is straight and the logo on the steering wheel lines up properly. If
the wheel is straight and the steering wheel logo is misaligned, the steering wheel may
be removed and repositioned
To do this, use a 3 mm hex to remove the three screws that reside on the underside of
14.
the steering wheel. Do not remove the Phillips screws
Use a 7/8 socket wrench to remove the nylon nut and washer that secures the steering
15.
wheel. Wiggle the steering wheel back and forth and pull up to remove. Once freed,
realign and reassemble
Brain Corporation Proprietary and Confidential
64
Steering Troubleshooting Guide
Date Published: 4/9/21
43
Page
of
Advertisement
Table of Contents
