Sunny Health & Fitness SF-T7942 User Manual page 8

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907- 8669).
ASSEMBLY INSTRUCTIONS
NOTE: It is recommended to have two
persons to proceed with the assembly.
Ensure that you have a clean and
adequate working space before starting to
assemble the treadmill.
STEP 1:
Open the carton and remove packing
materials. Place the Main Base (No. A) on
a level ground.
STEP 2:
Position Main Base (No. A) upright
supporting area "F" and prevent it from fal
during assembly.
Attach the Left Base Support Tube (No. C
to Base Frame (No. A01), using 1 Bolt (N
E04), 2 Arc Washers (No. E20), and 1 N
(No. E02). Tighten with your hand.
Then, screw Bolt (No. E05) and Arc Wash
(No. E20) into the Base Frame (No. A01
Tighten with your
Use Allen Wrench (No. B04) and Spann
with Screwdriver (No. B03) to tighten Bo
(No. E04) and Bolt (No. E05).
Repeat the above steps to assemble th
Right Base Support Tube (No. D) to th
Base Frame (No. A01).
7
hand.