Lubricating The Treadmill - Sunny Health & Fitness SF-T7942 User Manual

*IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use.
RUNNING BELT & TREADMILL LUBRICANT:
Lubricating the Running Board (No. D12) and Running Belt (No. C13) is essential as the friction
affects the life span and operations of the treadmill. Inspect the Running Board (No. D12) and
Running Belt (No. C13) regularly. If you find any wear on the Running Board (No. D12), please
contact us at: support@sunnyhealthfitness.com
WARNING:
Always unplug the treadmill from the electrical outlet before cleaning, lubricating,
or repairing the unit.
HOW TO LUBRICATE:
1. Raise the Running Belt (No. C13) up on one side and apply lubricant to the Running Board
(No. D12). Use a rag to thoroughly wipe the lubricant over the Running Board (No. D12). Repeat
this process for the other side.
2. The moving parts should turn freely and quietly. Abnormal moving parts will affect the safety of
the equipment. Inspect and tighten bolts regularly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance is
taking place on a regular basis.
4. DO NOT LOOSEN OR MAKE ANY ADJUSTMENT TO THE RUNNING BELT WHILE APPLING
LUBRICANT. A loose Running Belt (No. C13) will result in the runner sliding off during use, while
too tight of a Running Belt (No. C13) will negatively affect the motor's performance and create
more friction between the roller and Running Belt (No. C13). The most suitable tightness for the
Running Belt (No. C13) is when it is pulled out 50-75mm from the Running Board (No. D12).
Light user (less than 3 hours/ week)
Medium user (3-5 hours/ week)
Heavy user (more than 5 hours/ week)

LUBRICATING THE TREADMILL

Recommended Time Table:
.
every six months
every three months
every two months
12