Table of Contents
Advertisement
E06: Motor Abnormality.
E08:
Control
Abnormality.
E10: Motor Abnormality.
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
contact Customer Service at support@sunnyhealthfitness.com.
The motor wire is not
connected, or the motor is
damaged.
Board
The control board is not
connected.
Motor is short-circuited.
A moving part
treadmill
is
therefore
the
unable to rotate properly.
Check motor wires to see if
the motor is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is
not rectified, you may need
to replace the motor.
Check the upper and middle
wires to see if the control
board is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is
not rectified, you may need
to replace the control board.
Replace with a new motor.
Inspect moving parts of the
of
the
treadmill to ensure that they
stuck
and
are operating correctly and
motor
is
lubricate treadmill. Replace
the motor if necessary.
23
Version 1.2
Advertisement
Table of Contents
