Table of Contents
Advertisement
Appendix B: System Specifications
Appendix B
System Specifications
Note: Unless noted specifications apply to a complete system (all serverboards).
Processors
Dual AMD Opteron 6000 series processors (AMD Socket G34 type)
Note: Both CPUs must be of the same type.
Note: Please refer to our web site for a complete listing of supported processors.
Note: Supports 6000 processors with Max ACP 80W (TDP 115W).
Chipset
AMD SR5690/SP5100 Chipset
BIOS
16 Mb AMI BIOS® SPI Flash EPROM (each serverboard)
Memory Capacity
The H8DGT-HLIBQF/HLF serverboard has eight (8) single/dual/tri/quad
channel DIMM slots supporting up to 256 GB of registered ECC or
64 GB of Unbuffered ECC/non-ECC DDR3-1600/1333/1066 MHz speed
1 GB, 2 GB, 4 GB, 8 GB or 16 GB size SDRAM
Note: Interleaved memory - requires memory must be installed four modules at a time. See
Section 5-6 for details.
SAS Controller
LSI 2108 controller for 6 Gb/s SAS drives HW RAID (RAID 0, 1, 10, 5, 50, and
6 support)
Drive Bays
The A+ 2122TG-H6RF/H6IBQRF server supports twenty-four (24) hot-swap drive
bays to house up to twenty-four SATA/SAS drives, six for each node
Expansion Slots
Total of four PCI-Express x16 low-profile slots on serverboards (one for each
serverboard with preinstalled riser card )
B-1
Advertisement
Table of Contents
