Table of Contents
Advertisement
A+ SERVER 2122TG-H6IBQRF/H6RF USER'S MANUAL
Front Control Panel
SC217 models include four front panels on the handles of the chassis which control
each of the systems. Each control panel on the A+ Server 2122TG-H6IBQRF/H6RF
provides you with system monitoring and control for one server node. LEDs indicate
system power, UID, HDD activity, network activity, system status and power supply
failure. A main power button and a UID button are also included.
I/O Backplane
The SAS217HQ I/O backplane provides a total of 24 2.5" SATA/SAS HDDs, power
button, UID button and LEDs for each node.
Rear I/O
Each computing node provides a low-profile add-on card slot, a COM port, a VGA
port, two USB 2.0 ports, one IPMI Ethernet port, two gigabit Ethernet ports, and
one Infiniband port per node (2122TG-H6IBQRF only).
Cooling System
The chassis accepts four system fans powered from the backplane. When Node A
and/or Node B are powered on, both fans on the left of the chassis will run. When
Node C and/or Node D are powered on, both fans on the right of the chassis will run.
Air Shrouds
The chassis includes four mylar air shrouds that direct the airflow where cooling is
needed on each serverboard. Always use the air shroud included with your chassis
on each serverboard.
Mounting Rails
The includes a set of quick-release rails, and can be placed in a rack for secure
storage and use. To setup your rack, follow the instructions included in this manual.
1-4
Advertisement
Table of Contents
