Table of Contents
Advertisement
A+ SERVER 2122TG-H6IBQRF/H6RF USER'S MANUAL
1-2
Serverboard Features
At the heart of the A+ Server 2122TG-H6IBQRF/H6RF lies the H8DGT-HLIBQF/HLF,
a dual processor serverboard based on the AMD SR5690/SP5100 chipset and
designed to provide maximum performance. Up to four of these serverboards can
be mounted in the SC217 chassis.
The sections below cover the main features of the H8DGT-HLIBQF/HLF serverboard
(see Figure 1-1 for a block diagram of the chipset).
Processors
The H8DGT-HLIBQF/HLF supports single or dual AMD Opteron 6000 series
processors (AMD Socket G34 type). Please refer to the serverboard description
pages on our web site for a complete listing of supported processors (www.
supermicro.com).
Memory
Each H8DGT-HLIBQF/HLF serverboard has eight (8) single/dual/tri/quad
channel DIMM slots that can support up to 64 GB of ECC/Non-ECC UDIMM or
up to 256 GB of ECC RDIMM DDR3-1600/1333/1066 MHz speed SDRAM in
1 GB, 2 GB, 4 GB, 8 GB or 16 GB sizes of 1.5V or 1.35V voltages.
SAS
A LSI
SAS2108 SAS2 controller is integrated into the BPN-ADP-SAS2-H6IR-O-P
®
backplane to provide an six port 6 Gb/s SAS2 (Serial Attached SCSI) subsystem,
which is RAID 0, 1, 5, 6 and 10 supported. The SAS drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hotswap
capability and RAID function of the SAS drives
PCI Expansion Slots
Each H8DGT-HLIBQF/HLF serverboard has:
•
One (1) PCI-Express x16 Gen. 2 slot
•
One (1) PCI-Express x8 in x4 Gen. 2 slot (for SAS adapter cards)
Onboard Controllers/Ports
Onboard I/O back panel ports include one COM port, a VGA port, two Gb LAN
ports, a dedicated IPMI LAN port, two USB ports and one single QSFP Mellonox
Connect-X2 InfiniBand™ connector (2122TG-H6IBQRF only). Two USB headers
and one USB Type-A port are also included on the motherboard.
1-2
Advertisement
Table of Contents
