Air Shrouds - Supero A+ 122TG-H6IBQRF User Manual

A+ SERVER 2122TG-H6IBQRF/H6RF USER'S MANUAL
6-4

Air Shrouds

Air shrouds concentrate airflow to maximize fan efficiency. The SC217 chassis
requires air shrouds for each motherboard node. Air shrouds vary depending upon
the motherboard used. See the illustrations below.
Installing an Air Shroud (Figure 6-3)
1. Make sure that the motherboard expansion card (if applicable) and all
components are properly installed in each motherboard node.
2. Place the first air shroud over the motherboard, as shown below. The air
shroud sits behind the system fans and goes over the top of the motherboard
and its components.
3. Repeat the procedure for the remaining three motherboard nodes.
Installation Complete
In most cases, the chassis power supply and fans are pre-installed. If you need
to install fans or power supplies, continue to the Systems Fan and Power Supply
sections of this chapter. If the chassis will be installed into a rack, continue to the
next chapter for rack installation instructions.
Figure 6-3. Installing the Air Shroud
6-4