Table of Contents
Advertisement
Chapter 5: Advanced Serverboard Setup
JP3 Adapter Card Connector
JP3 Adapter card connector slot provides
front access to the power supply, serial ATA
and Front Panel Control connections for
the H8DGT series motherboards. Plug an
Adapter card into this connector to use the
functions indicated above. This connector
is designed specifically for a Supermicro-
proprietary adapter card.
InfiniBand Connector (2122TG-H6IBQRF
only)
The H8DGT-HLIBQF serverboard includes
a single QDR (quad data rate) speed
InfiniBand QSFP connector located at JB1
on the serverboard.
The JIB1 jumper must be enabled to use the
InfiniBand connector on the serverboard (see
section 5-10). LED indicators on the board
indicate use and activity on the InfiniBand
connector (see section 5-11 for details).
SXB1 Adapter Card Slot/Connector
A PCI-Express 2.0 x8 (in x4) slot (SXB1) is
located at JPCIE2 on the motherboard. This
slot is used for an SMC proprietary SAS
adapter card.
5-15
Advertisement
Table of Contents
