Table of Contents
Advertisement
5-8
Connector Definitions
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (designated
LAN1 and LAN2) are located beside the
Serial port. Additionally, there is a dedicated
LAN port for IPMI above the two rear USB
ports. These Ethernet ports accept RJ45
type cables.
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB 2.0)
and one additional Type A port (USB4) are
included on the serverboard. See the table
on the right for pin definitions.
USB Headers
Two USB 2.0 headers (USB2/3) are also
included on the motherboard. These may
be connected to provide front side access. A
USB cable (not included) is needed for the
connection. See the table on the right for
pin definitions.
Serial Ports
The COM1 serial port is located beside the
VGA port. Refer to the motherboard layout
for the location of the COM2 header. See the
table on the right for pin definitions.
Chapter 5: Advanced Serverboard Setup
Universal Serial Bus Ports
Pin Definitions (USB0/1, USB4)
USB0
Pin # Definition
1
+5V
2
PO-
3
PO+
4
Ground
Universal Serial Bus Headers
Pin Definitions (USB2/3)
USB2
Pin # Definition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
Note: NC indicates no connection.
Serial Port Pin Definitions
Pin # Definition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
Note: NC indicates no connection.
5-13
USB1
Pin # Definition
1
+5V
2
PO-
3
PO+
4
Ground
USB3
Pin # Definition
1
+5V
2
PO-
3
PO+
4
Ground
5
NC
(COM1/COM2)
Pin # Definition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Advertisement
Table of Contents
