Table of Contents
Advertisement
NIC: Indicates network activity on either LAN1 or LAN2 when flashing..
3-4
Drive Carrier LEDs
The SC217 chassis uses SAS/SATA drives.
SAS/SATA Drives
Each drive carrier has two LEDs.
•
Green: Each drive carrier has a green LED. When illuminated, this green LED
(on the front of the SAS/SATA drive carrier) indicates drive activity. A connection
to the SATA backplane enables this LED to blink on and off when that particular
drive is being accessed.
•
Red: The red LED to indicate an SAS/SATA drive failure. If one of the drives
fails, you should be notified by your system management software.
SCSI Drives
This chassis does not support SCSI drives at this time.
Chapter 3: System Interface
3-3
Advertisement
Table of Contents
