Installation - NTI ENVIROMUX Series Installation And Operation Manual

Automatic voice dialer system

Hide thumbs Also See for ENVIROMUX Series:

NTI Automatic Voice Dialer

INSTALLATION

The dialer must be connected to a +12 V power supply. Standard copper wiring should be used. Connect the alarm cable wiring

starting with +12V and 0V connections from the ENVIROMUX and wire them into the +12V and 0V terminals of the Dialer. If the

ENVIROMUX is not being used as the power supply for the Dialer then a common 0V connection between the control panel and

dialer must be made. Now wire as many trigger channels from the ENVIROMUX to the auto dialer as required.

Wiring examples

are provided.

Table of Contents

Enviromux e-avds-celc-v3