Introduction; Materials - NTI ENVIROMUX Series Installation And Operation Manual

NTI Automatic Voice Dialer

INTRODUCTION

The E-AVDS-CELC-V3 is an automatic voice dialer system that when used in conjunction with the ENVIROMUX Enterprise
Environment Monitoring System can call up to 6 pre-programmed numbers and provide a recorded message communicating the
status of a sensor. When the SYSTEM recognizes an alarm it triggers the auto dialer. The telephone auto dialer uses a
telephone line to dial the pre-programmed telephone number. It then replays a previously recorded message, thereby alerting the
recipient of the call to the alarm and potential intrusion. Once the user is connected through the phone line, they can operate the
auto-dialer remotely.
Features:

Calls up to 6 telephones or cell phones when a sensor goes out of range of a configurable threshold.
Initial "location" part of voice message can be up to 12 seconds.
o
Up to three different endings for custom recorded voice messages of up to 6 seconds each.
o

Four input channels.
E-16D supports four input channels via the Output Relay connections.
o
E-5D supports two input channels
o
E-2D supports one input channel
o

For full channel support with E-5D and E-2D, use in conjunction with a E-DI16DOR16 to work with the
dialer. (Note: When using the E-DI16DOR16, each input must be set to N.O.)

Powered by the E-2D/5D/16D.
Current consumption: 50mA @ 12VDC.
o

The dialer message playback tone is adjustable

The last event that has occurred is viewable on the LCD display

The auto dialer can be operated remotely after answering the phone call or calling it directly

Dimensions WxDxH: 3.94x5.51x1.38 in (100x140x35 mm)

Regulatory approvals: CE, RoHS

MATERIALS

Materials supplied with this kit

NTI E-AVDS-CELC-V3

URL Slip with path to this manual
:
1