Connecting To A Computer; Switching On The Printer - CAB MACH2 Operator's Manual

3 Connecting and Switching on the Device
3.1.2

Connecting to a Computer

!
Attention!
Loss of material!
The RS-232 interface is unsuitable for fast transmission of changing data.
 Use USB or Ethernet interface for print operation.
 Use the RS-232 interface only for setting up the printer.
Fig. 8 Connect the printer to the computer via USB or Ethernet.
 Plug the USB cable (1) into the USB interface (2) on the printer.
or
 Plug the Ethernet cable into the Ethernet interface (3) on the printer.
 Connect the cable to the corresponding interface on the computer (4).
3.2

Switching on the Printer

When all connections have been made correctly:
1
Fig. 9 Switching on the Printer
 Switch the printer on at the POWER button (1).
The printer performs a system test, and then the system status is shown in the LCD display (2).
3
2
4
1
2
11