Accessories; Preparation Steps - CAB MACH2 Operator's Manual

8

Accessories

40
8.1

Preparation Steps

i
Note!
The accessories, Present Sensor and cutter, can only be installed separately.
They cannot be combined.
Open the Printer
Fig. 22 Open the printer
 Place the printer on a flat surface.
 Pull the cover release catches (1) on both sides of the printer.
 Raise the cover of the casing (2) and lock it into the catch.
Remove the front cover
Fig. 23 Remove the front cover
 Pull upward to remove the front cover (3).
2
1
3
40