Configuration Via The Printer Website - CAB a2+ Configuration Instructions

A2+/A4+/A6+/A8+
Configuration
4.2

Configuration via the printer website

The parameters accessible via the operating panel can also be set via the website contained in the firm-
ware of the printer. In addition, other parameters for the Ethernet interface are accessible there.
You can access the printer website with a Java-capable browser (e.g. Microsoft Internet Explorer,
Netscape Navigator) via the Ethernet interface. Use of the Java applets requires at least version 1.4.2
of Java.
4.2.1 Calling up the printer website
It is absolutely necessary to define a PIN in order to make settings via the printer website. You are
requested to enter this PIN whenever settings are changed via the website. The initial setting of the PIN
can be make via the operating panel of the printer (see "4.1.6" on Page 27) or via the printer website
(see "Setup tab" on Page 31).
1. Start the browser.
2. Call up printer website by entering the IP address via HTTP (e.g. http://192.168.100.208).
The "Status" tab is open on the home screen.
3. Check to see if the status "Ready" is displayed.
4.2.2 Description of the printer website
The printer website contains the following tabs:
•
Status: general status description. See "Status tab" on Page 29.
•
Setup: configuration parameter settings. See "Setup tab" on Page 31.
•
System messages: automatic sending of messages via e-mail. See "System messages tab" on
Page 33.
•
Printer status line: printer status line layout. See "Printer status line tab" on Page 34.
•
Fonts: overview of the available fonts. See "Fonts tab" on Page 35.
•
Devices: list of the hardware and optional components. See "Devices tab" on Page 36.
•
Help: online help. See "Help tab" on Page 36.
28 Configuration Instructions Edition 5/06