Lcd Interface - Introduction - CAB MACH2 Operator's Manual

6 Printer Setting and Control
22
6.2 LCD Interface – Introduction
Status of LCD Interface
When printer is on standby status (ready to print), the LCD interface will display "Ready" on screen.
You can only print on this "Ready" status.
If there is any printers error, the LCD screen will display the error screen to show the type of error.
You can fix the error according the notice.
WARNING ICON
Icon Definition
Table 1
To upper level
To upper level
Lock
Unlock
Scroll the value
Icon Definition LCD Interface
MACH2/200 V1.RC0
MACH2/200 V1.RC0
Check Ribbon
Appears on the Navigation Icon of SettingPages. It guides you back to
upper level bypressing "LEFT" key.
Appears on the Navigation Icon of SettingValue Pages. It guides you
back to upper levelby pressing "UP" key.
On Setting Value pages, press "RIGTH" key to lock the value for
preventing unexpected change.
For locked value, press "RIGHT" key again tounlock the value.
On Setting Value pages, press "UP" or "DOWN" key to scroll the values
for your selection.
ERROR ICON
ERROR DESCRIPTION
22