Connecting The Device; Connecting To The Power Supply; Connecting To A Computer Or Computer Network; Switching On The Device - CAB SQUIX Operator's Manual

2 Installation
2.4

Connecting the Device

The standard available interfaces and connectors are shown in Figure 4.
2.4.1

Connecting to the Power Supply

The printer is equipped with a wide area power unit. The device can be operated with a supply voltage of
230 V~/50 Hz or 115 V~/60 Hz without adjustment.
1. Check that the device is switched off.
2. Plug the power cable into the power connection socket (28).
3. Plug the power cable into a grounded socket.
2.4.2

Connecting to a Computer or Computer Network

!
Attention!
Inadequate or no grounding can cause malfunctions during operations.
Ensure that all computers and cables connected to the label printer are grounded.
 Connect the label printer to a computer or network by a suitable cable.
For details of the configuration of the individual interfaces  Configuration Manual.

Switching on the Device

2.5
When all connections have been made:
 Switch the printer on at the power switch (27).
The printer performs a system test, and then shows the system status Ready in the display (10).
9