How To Turn Key Beeps On/Off - Furuno FI70DSW Operator's Manual

4. Press the software keys to select the item you wish to adjust, then press the
function key. The setting options pop-up window is displayed.
5. Press the left software key to select the next item above your current selection,
or increase the value for the current selection.
Press the right software key to select the next item below your current selection,
or decrease the value for the current selection.
6. Press the function key to apply the changes, then press the Menu/Back key to
close the menu.
Main menu items
The main menu has the following menu items which appear in all menus, regardless
of the category selected:
Menu item
[Alarms]
[Disp Config]
[Alarm Log]
[Sensor in Use]
[System]
For category specific menus, see the appropriate category in chapter 2.
1.5

How to Turn Key Beeps On/Off

1. Press the Menu/Back key to open the main menu.
2. Press the right software key to scroll down
the menu and select [System], then press
the function key.
3. [Key Beep] is already selected, press the
function key.
4. Press the software keys to select [ON] or
[OFF], as appropriate, then press the
function key to apply the setting.
5. Press the Menu/Back key to close the menu.
1. OPERATION AND CONTROLS OVERVIEW
8
Engine Motor
Numerical
pop-up
Set alarms. (See section 6.3 for details on the [Alarm] menu.)
Change the information displayed on each page.
(See section 1.7 for more information.)
Open the alarm log. (See section 6.3 for more information.)
Displays a list showing the sensors currently set in the [Data
Source] menu.
Change the FI-70 settings. (See chapter 4 for more information.)
Power Boat
Sailboat
Setting
options
pop-up
Description
Key Beep:
Panel Dimmer:
Sharing:
Group:
System
OFF
8
Stand Alone
A
Ent
1-3