Internal Time; Key Beeps - Furuno FE-800 Operator's Manual

2. SYSTEM MENU
2.9.2

Internal time

The internal clock can be set to show the day, month, year, hour, minute and second. By default,
this is set to "00:00:00 1/Jan/2014". You can adjust the time as follows.
1. Press the MENU/ESC key to open the Main menu.
2. Select [System] using  or , then press the ENT key.
3. Select [Ships's Time] using  or , then press the ENT key.
4. Select [Internal] using  or , then press the ENT key. This will open a pop-up window.
5. Select [Date] or [Time] as appropriate, using  or , then press the ENT key.
6. Adjust the parameter using  or , then press the ENT key to apply the settings and close
the pop-up window. To keep the default setting, press the DISP key or the MENU/ESC key.
7. Press the MENU/ESC key four times to close the menu.
2.10

Key Beeps

Each key press on the FE-800 can produce a beep sound. You can turn the key beep off by doing
the following.
1. Press the MENU/ESC key to open the Main menu.
2. Select [System] using  or , then press the ENT key.
3. Select [Key Sound] using  or , then press the ENT key.
4. Select [ON] to output a sound, select [OFF] to stop sound output.
5. Press the DISP key to close the menu.
Setting Format
Date Day/Month/Year
Time Hours:minutes:seconds
33