How To Interpret The I/O Setup Menu - Furuno FI70DSW Operator's Manual

4. SYSTEM MENU
[System Information]
[Factory Default]
4. Press the Menu/Back key twice to close the menu.
4.9

How to Interpret the I/O Setup Menu

The [I/O Setup] menu contains information re-
garding incoming data. This menu is
accessed from the [System] menu.
[Incoming PGN]
Select [Incoming PGN] to display a list of PGNs
which may be input to this FI-70 unit. Items in
the PGN list which are available are shown in
black, unavailable items are shown in gray.
[Device List]
Select [Device List] to display a list of devices
connected to the same network as this FI-70
unit. The list shows the device name and the de-
vice's unique network identification number.
[NMEA2000 Refresh]
Select [NMEA2000 Refresh] to refresh the items
displayed in the [Incoming PGN] and [Device
List] screens. The lists should be refreshed
when devices are added or removed from the
same network as this FI-70 unit.
[Wiring Info]
Select [Wiring Info] to display the NMEA2000 connector's wiring signals and wire
colors.
4-12
Menu item
Show the system information (ex. software program
number) of the SATELLITE COMPASS
Note: For SCX-20, the OS program number is not
shown.
Restore the SATELLITE COMPASS
default.
Description
™
™
to the factory
I/O Setup
Incoming PGN
Device List
NMEA2000 Refresh
Wiring Info
Ent
Incoming PGN
126992 126996 127237 127245 127250
127251 127257 127258 127488 127489
127493 127497 127505 128259 128267
129025 129026 129029 129033 129038
129039 129040 129283 129284 129285
System Time
Currently selected PGN's name
Device List
SC-30 :000200
WS-200 :000032
IF-NMEAF :000004
IF-NMEAF :000005
.