Wind Category - Furuno FI70DSW Operator's Manual

2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
2.8

Wind Category

4
A
1
AWA
50
3
AWA/TWA
1 Wind Angle
*: Heading, AWA/AWS and STW data are required to display Ground Wind.
This category displays various wind data. There are three wind modes available, as
shown in the figure above. The apparent and true wind data can be assigned on each
page.
Press the function key to cycle through the following data in the [Wind] category:
Displayable data
AWA
AWS
TWA
TWS
TWS Max.
Beaufort
1
* : Note that the AWA, AWS and ship's speed (STW or SOG) data are required to dis-
play true wind (ship's speed data priority: STW > SOG).
2
* : The maximum value is calculated from when the FI-70 is turned on. The maximum
value is reset when the power is turned off.
2-8
1
º
3
CH AWA/CH TWA
2 Ground Wind*
Displays Apparent Wind Angle (AWA).
(When the apparent wind data is displayed)
Displays Apparent Wind Speed (AWS).
(When the apparent wind data is displayed)
Displays True Wind Angle (TWA).
(When the true wind data*
Displays True Wind Speed (TWS).
(When the true wind data*
Displays the maximum value*
(When the true wind data*
Displays wind strength in Beaufort units.
4
T
2
A
AWA
AWA
27
º
3
3 Data display
Description
1
is displayed)
1
is displayed)
2
of the TWS.
1
is displayed)
4
A
AWA
27
º
Ground Wind
4 Display mode
T: True
A: Apparent