Contec IPC Series User Manual page 33

Flat panel display non face-plate type dc12v, 10.4"/12.1"/15.0"-tft, lvds

Hide thumbs Also See for IPC Series:

Table of Contents

4. Hardware Setup

When connecting to a

SEH-9450-LAS/SPC-9450-LV/SPI-845x-LLVA/SLC-85xx-LxA/SPC-852x-LA/IPC-BX701/IPC-BX9

00/IPC-BX950 series

It is required to set the output resolution to a right one via BIOS according to the supported resolution of

the connected flat panel display.

1. Select the "Advanced Chipset Features".

Figure 5.3. Advanced Chipset Features Setup

2. Specify the output resolution corresponding to the connected display from the "Panel Number".

Figure 5.4. Panel Number Setup

FPD-M75VT-DC1, FPD-L75ST-DC1, FPD-H75XT-DC1

Table of Contents

Fpd-m75vt-dc1 Fpd-l75st-dc1 Fpd-h75xt-dc1