Contec IPC Series User Manual page 23

4. Hardware Setup
To maintain the ambient temperature within the installation environment requirement range, provide a
gap of 50mm or more between the main unit and any adjacent equipment.
Side view
Panel
50mm or more
(above)
50mm or
more
(Bottom)
50mm or more (Back)
Figure 4.2. Distances Between Computer and Surroundings
Installed angle which is recommended
Installed angle of this product which is recommended is 0 - 45°. Except for that, the temperature
specification of this product might not be filled.
0°
+θ
-θ
45°
Side view
Figure 4.3. Installed angle which is recommended
18
Bottom view
50mm or more
(Side)
FPD-M75VT-DC1, FPD-L75ST-DC1, FPD-H75XT-DC1
Interface surface
Panel