Introduction; About This Guide; Overview - Extron electronics PowerCage 1600 User Manual

Introduction

This guide describes the Extron PowerCage 1600 Modular Power Enclosure and how to install,
configure, and operate the enclosure and its optional transmitter and receiver boards.
This section of the guide covers the following topics:
•
•
•
•

About this Guide

Throughout this guide "PowerCage" and "the enclosure" refer to the PowerCage 1600 Enclosure.
NOTE: Observe all applicable building codes and local ordinances when installing the

Overview

The PowerCage 1600 is a rack-mountable, 16-slot enclosure with vents, fans, and an
integrated power supply (or redundant power supplies) that supports a wide range of Extron
fiber optic and twisted pair AV transmitter and receiver boards. It provides an efficient way to
power and mount multiple transmitters and receivers.
Figure 1.
About this Guide
Overview
Features
System Example
enclosure.
1 2 3 4 5 6 7 8 9
COMM
POWER
ALARM
Front Panel (shown with rack ears installed)
PowerCage 1600 PowerCage 1600
Power Supply Power Supply
N15778
I.T.E.
1T23
100-240V 50/60Hz
5A MAX.
Rear Panel (shown populated with optional redundant power supply)
Enclosure Front and Rear Panel Views
10 11 12 13 14 15 16
PSU PSU FAN FAN
1 2 1 2
PowerCage 1600 Enclosure • Introduction
COMM
SELECT
TEMP
CONFIG
PowerCage 1600
1