Critical Stability Weights; Lubrication Specifications - JLG 3394RT Service Maintenance Manual

SECTION 1 - SPECIFICATIONS

1.11 CRITICAL STABILITY WEIGHTS

DO NOT REPLACE ITEMS CRITICAL TO STABILITY WITH ITEMS
OF DIFFERENT WEIGHT OR SPECIFICATION (FOR EXAMPLE:
FILLED TIRES, ENGINE) DO NOT MODIFY UNIT IN ANY WAY TO
AFFECT STABILITY.
Table 1-12. Critical Stability Weights
Component
Tires
12 x 16.5 Pneumatic
12 x16.5 Foam Filled
33/1550-16.5 Pneumatic
33/1550-16.5 Foam Filled
33/16LL x 16.1 Foam Filled - Sand
Engine (Ford)
Engine (Deutz)
Engine (GM)

1.12 LUBRICATION SPECIFICATIONS

Table 1-13. Hydraulic Oil
HYDRAULIC SYSTEM
OPERATING
TEMPERATURE RANGE
0°F to +23°F
(-18°C to -5°C)
0°F to +210°F
(-18°C to +100°C)
+50°F to +210°F
(+10°C to +100°C)
1-4
Weight
132 lbs (60 kg)
352 lbs (160 kg)
162 lbs (73 kg)
410 lbs (186 kg)
426 lbs (193 kg)
324 lbs (147 kg)
441 lbs (200 kg)
341 lbs (155 kg)
SAE VISCOSITY GRADE
10W
10W-20,10W-30
20W-20
– JLG Sizzor –
NOTE: Hydraulic oils must have anti-wear qualities at least
to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index of
152 .
Table 1-14. Mobil DTE 13M Specs
ISO Viscosity Grade
Specific Gravity
Pour Point, Max
Flash Point, Min.
Viscosity
at 40° C
at 100° C
at 100° F
at 210° F
cp at -20° F
Viscosity Index
Table 1-15. Mobil EAL 224H Specs
Type
ISO Viscosity Grade
Specific Gravity
Pour Point, Max
Flash Point, Min.
Operating Temp.
Viscosity
at 40°C
at 100°C
Viscosity Index
NOTE: Must be stored above 32°F (14°C)
#32
0.877
-40°F (-40°C)
330°F (166°C)
33cSt
6.6 cSt
169 SUS
48 SUS
6,200
140
Synthetic Biodegradable
32/46
0.922
-25°F (-32°C)
428°F (220°C)
0°F to 180°F (-17°C to 162°C)
37 cSt
8.4 cSt
213
3121133